Porch Valance Installation Instructions

 1.  Install Headrod Clamps 3" in from each end of Valance.

 2.  Install Extra Headrod Clamps evenly throughout width of valance.

 3.  If Headrod has been cut for shipping, use couplings provided to

     connect Headrod into one length.

 4.  Slide fiberglass Headrod through pocket on top of the valance.

 5.  Insert into Headrod Clamps and tighten wing nuts.

                                  Headrod Clamp

If you have any questions contact PYC Awnings at sales@pycawnings.com or 1-800-933-6936